Myers Technology Company
New and Used CNC Machine Tools
Phone: 847-290-0167
Fax: 847-290-0168
sales@myerstc.com
Myers Machinery Company
2150 Touhy Avenue
Elk Grove Village, IL 60007


Pinnacle AX450 w/ Fanuc 0i-MF Control,  5 Axis Rotary Table ,  4+1 Axis Control VMC


Pinnacle AX450 w/ Fanuc 0i-MF Control, 5 Axis Rotary Table , 4+1 Axis Control VMC

Stock Number: 3275

Pinnacle AX450

Age: 2015

Condition: NEW




                            Additional Info on Pinnacle AX450 w/ Fanuc 0i-MF Control,  5 Axis Rotary Table ,  4+1 Axis Control VMC
Click to view larger photo


SpecificationDescription
TABLE 
Table Size17"
Travel Ranges ( X/Y/Z )29 x 24" x 22"
T Slot Size ( size & deg )14 x 45 min
Max. Table Load (0 deg/90deg g)300/250 X 2.2 = lbs.
Max. Workpiece Size (W x H)23" x 11"
Diameter of Table Hole6.73
Spindle Nose to Table Surface2 - 22"
A Axis, Tilt (deg) / (0.001 deg.)220 deg (+/- 110 deg.)
C Axis Rotary (deg) / (0.001 deg.)360 deg.
  
SPINDLE 
Tool Shank & Pull StudISO40
Spindle Inner Diameter2.75591
Spindle Speed (rpm) Direct Drive10000 ( 12000 )
Spindle Speed (rpm) Built In15000
Main Motor (con./30min hp12 / 16
  
AXIS SERVO MOTOR 
Rapid Feed Rate (X/Y/Z - IPM1181" / 1181"
Feed Rate ( X/Y/Z - IPM945 IPM
Feed Rate ( A / C rev / min)393 IPM
X Axis Rated Torque - In/lb88.51
Y Axis Rated Torque - In/lb88.51
Z Axis Rated torque - In/lb88.51
A Axis Rated Torque - In/lb88.51
C Axis Rated Torque - In/lb88.51
  
  
  
  
  
AUTO TOOL CHANGER 
ATC Type24, 30 ( Chain - 40 )
Cam TypeArm
Tool Selection ( Bi-Direction )Random
Tool Storage Capacity ( Pcs )24 ( 30, 40 )
Max. Tool Diameter3.54331 ( 2.99213 )
Max Tool Length11.8"
Max Tool Weight17.63 lbs
  
MISCELLANOUS 
Air Requirement PSI84.34 PSI
Hydraulic Requirements40, 30 L
Voltage220 volt/3 phase/60 cycle
Power Requirement ( KVA )40
Coolant Tank Capacity ( Gal )79.25 Gallon
Machine Weight15432.36 lbs.
Machine Height114"
Floor Space ( L x W )122" x 88"
Packing Size ( L x W x H )122" x 88" x 100"
  
OPTIONAL ACESSORIES 
31i + ai Spindle Motor$25,392.00
Cat40 12000 RPM Direct-Drive$7,912.00
Cat40 15000 RPM Direct-Drive$16,560.00
Coolant Through Spindle ( CTS ) +20 Bar 
( No SubTank ) For Direct Drive$9,936.00
Coolant Thru Spindle ( CTS ) + 20 Bar + 79 gal 
Coolant Tank For Direct Drive$13,616.00
Coolant Thru Tool Holder$498.80
Two Screw Type Chip Conveyor at Left & Right$2,760.00
Arm Type 30-Tool ATC ( Cat40 )$1,472.00
Chain Type 40-Tool ATC$7,176.00
Oil Skimmer$496.80
M30 Automatic Power Off$184.00
Linear Scales For X/Y/Z Axis$11,408.00
Chain type 60 tool ATC$18,900.00
EQUIPPED WITH 
Fanuc 0i-MF + 10.4" Colorful TFT + AICC (200Blocks ) 
Fanuc function: Jerk Control Manual Guide i 
a8i (14.75 hp 30 min ) Spindle Motor + a12i Servo Motor 
Cat 40 Spindle Taper 10000RPM Direct Drive Spindle 
Metal Chip Cover for 3 Axis 
Auto Lubrication System 
X/Y/Z Oil Through Ballscrew 
Spindle Air Blast 
Spindle Oil Cooler, Flushing System 
Full Splash Guard w/Roof 
Cooling System 
Operation Status Light 
Work Lamp 
Cutting Air Blower 
  
  
  
  
  
  
TERMS: 30% Down to Place Order 
50% By Irrevocable LC at Site Before Shipment 
Balance Due 20% ( Net 10 )After Delivery 
Warranty 2 Years Parts and Mechanical 
  
  
  

Equipped With:
As Listed Above




HomeIndexContactView Cart


Pinnacle AX450 w/ Fanuc 0i-MF Control,  5 Axis Rotary Table ,  4+1 Axis Control VMC
Myers Technology Co.
2150 Touhy Ave
Elk Grove Village, IL 60007
847-290-0167
847-290-0168
johnm@myerstc.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com