Myers Technology Company
New and Used CNC Machine Tools
Phone: 847-290-0167
Fax: 847-290-0168
Myers Machinery Company
2150 Touhy Avenue
Elk Grove Village, IL 60007

Pinnacle BX-900A Heidenhain Control 5 Axis Vertical Machining Center w/ Built in Rotary Table

Pinnacle BX-900A Heidenhain Control 5 Axis Vertical Machining Center w/ Built in Rotary Table

Stock Number: 3303

Pinnacle BX-900A

Condition: NEW

BX900A is high speed, high accuracy with 5-axis simultaneously controlled machining center. Equips 15000rpm built-in spindle, B-axis swivel head ±120°, and C-axis Ø630mm rotary table (Built-in DD C-axis) to optimize machining space and allows complex workpieces to be finished in just one setup and reduces cycle time.

Table Size66.9" x 33.4"
Travel Range (X)59"
Travel Range ( Y)35.4"
Travel Range (Z)45.2"
Max Table Load4,400 Lbs.
Spindle Nose to Table Surface8.07" - 53.34"
T-Slot.7" x 5.92" x .19"
Spindle TaperDIN69871A
Bearing Inner Diameter2.75"
Spindle Center to Column29.92"
Spindle Speed15,000 RPM
Draw Bar Force900+ 100
Main Motor ( con/ 30 min)20HP/ 26 HP
Motor TypeIndramat
 1 MB 160F-4B
Motor Torque ( Con/ Max)48/ 120
Driver TypeWorm Gear
Reduction ratio1 : 120
Tilting Range120 degrees
Max. Speed (rpm)16.6 RPM
Clamp Torque(Nm)1765
Working Torque (Nm)765
TypeSeparated (Worm Gear Type)
Table Diameter24.8"
Center Bore Diameter2.95"
Rotation Speed11.1 RPM
Min. Index0.001
Max. Table Load1,763 Lbs
Rapid Feed Rate ( X/Y/Z ft/min)52.5'/ 52.5' / 39.4'
Feed Rate ( X/Y/Z ft/min)2,624'
Rated Torque (X/Y/Z ft/Nm)36'/36'/36'
B-Axis Rated Torque (Nm)11
C-Axis Rated Torque (Nm)11
ATC TypePlate
CAM TypeArm
Tool Selection (Bi-direction)Random
Tool Storage Capacity30 (40/60)
Max Tool Diameter3.5" (2.9")
Max Tool Length9.8"
Max Tool Weight17.63 Lbs
Positioning XYZ Linear Axis.000393"
BC Linear Axis.59"/ .39"
Repeatability XYZ Linear Axis.000196"
BC Linear Axis.39" / .196"
Air Requirement (kg/cm)6
Voltage380 V
Power Requirement(KVA)40
Coolant Tank Capacity185 Gallons
Machine Weight30,864 Lbs.
Machine Height126"
Floor Space155.5" x 125" x 126"

Equipped With:
HEIDENHAIN iTNC530 SMART+ 15”COLORFUL TFT, + HR410 ELECTRONIC HANDWHEEL DCM SOFTWARE + KINEMATICS SOFTWARE + TCPM SOFTWARE Oiled Cooled Ball-Screws Hiedenhain feedback scales($16,400) and Probe($14,000) (suggested) * Air blast through spindle * Circular coolant Nozzle * coolant flushing system * 3 axes protection covers * Full splash guard * Automatic lubrication system * Working lamp * Operation status light * Arm type 30-tool ATC * Z axis pneumatic balance system * Cooling system * Air gun and water spray-gun * MPG handwheel * Heat exchanger * RS-232 Interface * Rigid tapping * Spindle oil cooler * Adjusting tools and box * Leveling bolts and pads * Operation and programming manual * Encoder for B-axis & C-axis

HomeIndexContactView Cart

Pinnacle BX-900A Heidenhain Control 5 Axis Vertical Machining Center w/ Built in Rotary Table
Myers Technology Co.
2150 Touhy Ave
Elk Grove Village, IL 60007

Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers