Myers Technology Company
New and Used CNC Machine Tools
Phone: 847-290-0167
Fax: 847-290-0168
sales@myerstc.com
Myers Machinery Company
2150 Touhy Avenue
Elk Grove Village, IL 60007


Pinnacle BX-500 Heidenhain Control 5-Axis Vertical Machining Center w/ built in Rotary Table


Pinnacle BX-500 Heidenhain Control 5-Axis Vertical Machining Center w/ built in Rotary Table

Stock Number: 3450

Pinnacle BX-500


Pinnacle BX-500 Vertical Machining Center with Built in Rotary Table, and 5-Axis Machining, Simultaneous 5 Axis

             
Click to view larger photo


SpecificationDescription
  
TABLE 
Table Size57.08" x 24.01"
Travel Range (X)51.18"
Travel Range ( Y)24.01"
Travel Range (Z)24.01"
Max Table Load1,874 Lbs.
Spindle Nose to Table Surface4.33" - 28.34"
T-Slot.7" x 4.92" x .19"
  
BUILT-IN SPINDLE 
Spindle TaperBT 40
Bearing Inner Diameter2.75"
Spindle Center to Column26.57"
Spindle Speed15,000 RPM
Draw Bar Force900+ 100
Main Motor ( con/ 30 min)20HP/ 24 HP
Motor TypeIndramat 1 MB 160F-4B
Motor Torque ( Con/ Max Nm)48/120
  
SWING HEAD 
Driver TypeWorm Gear
Reduction ratio1 : 72
Tilting Range120 degrees
Max. Speed (rpm)25 RPM
Clamp Torque1157
Working Torque ( Nm )764
  
ROTARY TABLE 
TypeEmbedded
Drive TypeDirect Drive
Table Diameter19.68"
Center Bore Diameter1.96"
Rotation Speed50 RPM
Min. Index0.001
Max. Table Load1,102 Lbs.
  
AXIS SERVO MOTORS 
Rapid Feed Rate ( X/Y/Z ft/min)1416/1416/936 IPM
Feed Rate ( X/Y/Z Inches/min)394 IPM
Rated Torque (X/Y/Z ft/Nm)36'/36'/36'
B-Axis Rated Torque36'
C-Axis Rated Torque1033'
  
TOOL MAGAZINE 
ATC TypePlate
CAM TypeDual Arm
Tool Selection (Bi-direction)Random
Tool Storage Capacity24 (32/40)
Max Tool Diameter3.5" (2.9")
Max Tool Length9.8"
Max Tool Weight8
  
ACCURACY 
Positioning XYZ Linear Axis.00019"
BC Rotary (sec)15"/10"
Repeatability XYZ Linear Axis.00011"
BC Rotary (sec)10"/8"
  
MISCELLANEOUS 
Air Requirement (kg/cm)6
Voltage220/440 volt, 3 phase
Power Requirement(KVA)40
Coolant Tank Capacity80 Gallons
Machine Weight15,873 Lbs.
Machine Height122"
Floor Space133" x 87"
Packing Size135" x 90" x 100"
  
Optional 
TOUCH PROBE + RECEIVER + CALIBRATION BALL$12,880.00 INCLUDED, N/C
CTS + 20 BAR PUMP & TANK 71.6 Instead of 48 Nm$27,968.00
CTS + 20 BAR PUMP & Tank$9,936.00
CHAIN TYPE 40 - TOOL ATC$9,900.00
CHAIN TYPE 60 - TOOL ATC$21,000.00
HEIDENHAIN LINEAR SCALES FOR XYZ AXIS$13,432.00 INCLUDED, N/C
OIL SKIMMER$496.80
  
Warranty Machine and control, Parts and Labor2 Years
  
Terms 
Terms: 30% Down to Place Order - 50% by IrrevocableLC at Site Before Shipment
Balance Due 20% - Net 10 After Delivery 

Equipped With:
HEIDENHAIN iTNC 640 SMART+ 15”COLORFUL TFT, + HR410 ELECTRONIC HANDWHEEL Kinematics, DCM & TCPM software, 3 Axis heidenhain linear scales, Touch probe & calibration ball, ROLLER LINEAR GUIDEWAYS ON 3 AXES METAL CHIP COVER FOR 3 AXES COOLING SYSTEM WORKING LAMP, X/Y/Z OIL THROUGH BALLSCREW AUTO LUBRICATION SYSTEM OPERATION STATUS LIGHT SPINDLE OIL COOLER, FLUSHING SYSTEM FULL SPLASH GUARD WITH ROOF CHAIN TYPE CHIP CONVEYOR ARM TYPE 30-TOOL ATC B & C AXIS WITH ENCODER,


HomeIndexContactView Cart


Pinnacle BX-500 Heidenhain Control 5-Axis Vertical Machining Center w/ built in Rotary Table
Myers Technology Co.
2150 Touhy Ave
Elk Grove Village, IL 60007
847-290-0167
847-290-0168
johnm@myerstc.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com