Amada Carbide Ferrous High Speed Band saw CNC
Vertical band SawsHigh Speed Production Saw, CNC, For Alloys / hard material. dual barfeed with Auto bar change from one size to another, 16" Capacity,
barfeer with auto bar change over, Chip conveyor, CNC control, Dual Vises for minimum burr and all available manuals
Throat | 16" |
Work Height | 16" |
Power | 10 hp |
Blade Width | 1.5" |
Blade Length | 186" |
FPM | 50-492 |
Control | CNC (Amada) |
Weight | 9,000 lbs |
AMADA CTB400 CNC CARBIDE BLADE VERTICAL BAND SAW W/ In/Out CONVEYOR
Catalogue Specifications
Rounds Cutting Capacity (Diameter): 1.18" - 16"
Rectangle Cutting Capacity, (Min. W x H / Max. W x H): 1.18" x 0.5" / 16" x 16"
Work Load Capacity: 5,512 lbs.
Saw Blade Size (L x T x W): 186" x 0.055" x 1.5"
Saw Blade Speed: 50 FPM - 492 FPM
Saw Blade Motor: 10 hp
Hydraulic Pump Motor: 2 hp
Cutting Fluid Pump Motor: 1/4 hp
Wire Brush Motor: 1/8 hp
Electricals: AC220+/-10%, 3ph, 60 hz
Power Requirement: 16.6 kVa
Front Shuttle Vise Stroke: 11.8"
Rear Shuttle Vise Stroke: 15.7"
Shuttle Vise Length (Front + Rear): 0.39" - 393.7"
Number of Input Blocks and Stations: 30 blocks, 10 stations per block
Number of Cut-Off Pieces: 1-999
Remnant Length: 0.59"
EQUIPPED WITH:
CNC Blade Control
Hydraulic Tension Control
In and Out Conveyor