Newland VTL, VBM, vertical Boring Mill, Vertical turning center

Machine capacities: Metric Inch Options
Maximum turning diameter & swing: 1600 mm 62.9 in
Table diameter: 1250 mm 49.2 in
Maximum turning height: 1000 mm 39.3 in to 63 in
Maximum table load capacity: 12,000 kg 26,400 lbs.
Maximum cutting force 40,000 N 8,992 lb.
Maximum speed: Three (3) ranges 650 rpm 650 rpm
Power: (continuous)/S6 (40% duty cycle) 60 kW / 75kW 80.4 /100 HP
Torque: 20,000 Nm/14,750 lbs.-ft. or 30,000 Nm/22,125 lbs. ft.
Ram size: 204x204 mm - 8” x 8 “ or 254x254mm - 10 in x 10 in
Maximum cutting force 50,000 N 11,240 lbs.
Ram: Z-axis 800 mm/ 31.5 in or 1250mm - 49”
Cross-rail travel 600 mm/23.6 in or 1000 mm/ 39”
Cross-rail pitch / number fixed positions 200 mm / 4p 7.8" in / 4p
200 mm 7.8” / 6p- 9p
X /Z rapid traverse / feed rate 12,000 mm / 5,000 mm or 472 “/min / 200 “/min
Milling spindle-power kw/(HP) Cont./S6 Torque 30/37 kw/340 Nm 40/50 HP / 250 HP 418Nm-308ftlbs/1000-738ftlb
Machine Weight from 33kg from 72,736 lbs.

Machine Features:
• Newland’s proprietary 3-range gear-box provides high torque for roughing, high HP throughout speed range; high accuracies/ surface finishes with rigid, damping cast iron structures
• Proprietary Combination Guideways -box ways on X-axis with box ways on steel with hand scrapped bronze load bearing surfaces for heavy cutting performance opposite roller bearing packs for accurate contouring.
• Proprietary Ram Head Fully enclosed forged steel ram with bronze bearing surfaces on 4 sides. Forging prevents ram deflection. Contact area is 80%
• Proprietary Cross-rail positioning system-hardened & ground “stairs” for long term accuracy.
• Proprietary Ram Head / Saddle Pivot Point offers quick ram alignment if accident occurs
• Proprietary Tool locating/ clamping system: T-shaped drawbar against V-shaped locators; rigid
• 3.12” ball screws are used on all axes to drive heavy machining.
• Warranty: Standard Fanuc 31 I CNC Control warranty; One (1) Year Machine

Available Options:
Extended turning height; Dual Rams for 4axis turning; Special Table sizes, speeds and drive power; Hydraulic Chucks,
Grinding capabilities, larger ATCs; Part & tool probes; second Chip Conveyors; Angle Milling heads