1996 MARVEL/SPARTAN PA 10 Horizontal Band Saws (Automatic) | Myers Technology Co., LLC
Horizontal Band Saws (Automatic)
PA 10
Used - Good
Stock #:
For Sale
Serial #:
DPA 100261

Good condition 10" Automatic bandsaw with small foot print, Full PM and recalibration included, reconditioning/rebuild available upon request

Equipped With

Coolant system, Wash down hose, Split front vise, variable speed drive and all available manuals

Rect-Cap (H)8"
Rect-Cap (W)12"
Dimensions7' x 7' x 5'
Weight2,750 lbs.

Capacity: 10" x 12" Rectangle; 10" Round Blade: 1.” x .035” x 138” Blade Tension: Hydraulically controlled tension (30,000 psi) provides consistent square cutting accuracy. Includes a motion detector that will shut the machine off should the blade break or stall. Speed Range: 70 – 330 feet per minute (21 – 101 meters per minute) variable drive and heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. Hydraulic Down Feed: Feed rate and down pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station. Hydraulic Shuttle Feed: Length settings of 0 - 16” (0 – 406 mm) are selected with a hand-wheel and displayed on a digital counter. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy. Repeatability is + .005 per index. Motors: Blade Drive: 5 H.P. (3.75 kW). Hydraulic Pump Motor: 1 H.P. (.75 kW). Coolant Pump Motor: .125 H.P. (0.09 kW). Voltage: 230/ 460 Volt, 3 Phase, 60 Hz. Operator’s Control Panel: offers full control of all machine functions such as; Vises, Saw Frame, Parts Counter, Shuttle Advance & Retract, Coolant and Work Light. Piece Counter: The machine will stop the automatic cycle when the pre-set number of cuts has been reached. Out-of-Stock Switch: The machine will shut off automatically when material is no longer present in the rear vise. Blade Guides: The combination roller bearing and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies Fast Approach: Work height is automatically set allowing the head to raise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance. Chip Brush: Powered from the main drive shaft of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance and blade life. The front vise jaws are split to reduce the remnant to as little as 2.75” (70 mm). The split vise jaws also help to reduce burrs left on the material and are ideal for bundle cutting. Holding the work piece on both sides of the blade reduces vibration, providing more accurate cuts and longer blade life. Rear Vise: Weight Capacity: 2,134 lbs (968 mm) Machine Weight: 2,800 lbs (1588 kg) Table Height: 27” (686 mm)

Fully automatic Horizontal bandsaw, 10"

Fully automatic Horizontal bandsaw, 10"
Horizontal Band Saws (Automatic)