Supertec Automatic Surface grinder model Planotec 1632 NC

FEATURES
• The conversational PLC control uses a menu-driven LCD touch screen which is easy to learn
and easy to set. Simply fill in the blanks to set total grinding amount, rough increment,
fine increment, sparkout passes, feeding direction, parking position, wheelhead retract
distance, and press cycle start to complete automatic grinding cycle.
• Cycle interrupt button for free passes during cycle and final size verification/adjustment.
• All essential castings are rib reinforced to provide a rigid machine structure for long lasting
accuracy and stability.
• The precision cartridge spindle equipped with 4 pieces of preloaded class 7 (p4) super
precision angular contact ball bearings to ensure high accuracy and superior grinding finish.
• Spindle, couplings, and 7 ½ HP spindle motor are precisely balanced for low vibration
and powerful output to achieve precision grinding accuracy.
• Double V saddle and table ways are Turcite-B coated and precisely hand scraped to provide
a smooth movement for better accuracy and longer way life.
• Both saddle and table travel on Hydrostatic ways, a cushion of oil with no metal-to-metal
contact, providing excellent way longevity and accurate positioning.
• The rigid wheelhead travels on Box type slideways and is precisely positioned with a AC
servo motor and precision ballscrew to ensure better downfeed repeatability. The smallest
downfeed increment is 0.000010”.
• Crossfeed travel utilizes a precision ballscrew and AC inverter motor which provides a smooth,
accurate movement and allows criss-cross grinding for better workpiece finish.
• The hydraulic & coolant system are separated from the machine to eliminate vibration
and dissipate heat. A heat exchanger used on the hydraulic sys. maintains normal oil temperature.
• All moving surfaces and rotating parts are continuously lubricated by an auto-lube system
to ensure long service life and maintain maximum accuracy. An alarm light will illuminate
if oil pressure drops below recommended pressure.
GENERAL CAPACITY
Table size: 16" x 32"
Distance from table top to spindle center 22"
Longitudinal movement, manual 36"
Hydraulic traverse 36"
Table speed 1" IPM to 82' FPM
CROSS MOVEMENT:
Cross movement manual 18.5"
Cross movement Hydraulic 18"
Rapid traverse 40 IPM
auto travers increment 0.02" to 0.32"
Handwheel graduation 0.001"
Handwheel per revolution 0.2"
VERTICAL DOWNFEED:
automatic feed 0.000010" to 0.01"
Wheel head vertical feed per MPG 0.000010"/ 0.0001"/ .001"
Grinding wheel size 14" x 2" x 5"
Spindle motor 7.5 HP
Cross feed AC motor 1/4 th HP
Elevating motor, Servo motor 1.33 HP
OPTIONS:
OP6-5001 Electromagnetic chuck $ 3,890.00
OP6-5002 Auto. demag chuck control $ 1,060.00
OG#-2004 Coolant system w/ paper filter $ 2,670.00
TOTAL FOR ABOVE CHUCK< CONTROL AND COOLANT = $ 7,620.00
Special sale On stock machine No Charge
Mist collector above machine, Mounting extra $ 2,850.00
2 axis DROs, 1 micron, lifetime warranty $ 2,450.00
Approx. freight from CA to Fairbanks $ 2,350.00
Factory set up on site by Supertec 2 days $ 6,000.00
TOTAL FOR ABOVE OPTIONS AND MACHINE $ 67,540.00
ADDITIONALLY AVAILABLE:
440 volt operation
OG3-2002 coolant system w/ paper filter and magnetic separator
Spare wheel flanges