Filters

Excellent condition, Mitsubishi model MV1200R, latest version

Very good Condition Fanuc CNC Wire EDM, 14,192 hours

DELTA/WYE

Rotary table (30") tilting table, horizontal spindle surface grinder

Brother model TC-32BN=QT Vertical CNC Drilling and Tapping center with Brother B00 control, 26 ATC, 2 Pallet changer, 7.3 KW spindle motor, Built 2008

Very nice Hyster model H80XM LP lift truck, Solid tire, 185" triple mast, with Side shift and 6' Forks

Rotary Bender, Mechanical drive, 55MM #18 rebar capacity, 26" diameter Bending platen with 11 dies and 3 quick clamps and Logictron bend angle.

Chevalier Vertical machining center with Fanuc O-M control and Tool changer, Coolant system and full guards

Excellent condition horizontal #50 taper machine, includes carbide cutter and sub plate

Milford riveter model 313 with tooling set up for .170" x .250 long rivets, 115 volt 1/2 HP motor and Palm buttons

Acme auto feed riveter, set up for ,22" x .600" rivets, Baltec palm button controls, 115 volt motor, As taken from service

Amada HA-400W Fully reconditioned, fully automatic horizontal bandsaw with rapid approach, shuttle feed, multi index for reconditioning info see our web page: https://myerstc.com/refurbished_rebuilt

Acra heavy duty vertical knee mil, LCTM-1, with 3 HP variable speed head, R-8 Taper, 10" x 54" table, Hardened & ground ways, one shot lube and balanced head

5 x 12 Myford Model MG12-HPM Automatic Plain Cylindrical Grinder

Acra New AM5V 5 HP, CNC mill with 2 or 3 Axis Acu Rite Mill power control, 12.5" x 58" table and #40 spindle taper

Very clean Mori Seiki SL 150 MC, "C" axis CNC Lathe with Fanuc MSC-501 control, Sub Spindle and collet chucks

Acra 17" x 60" cc Gap Bed Engine Lathe. Precision Toolroom Lathe, variable speed New Precision Engine lathe With Inch/Metric threading, 3 gear ranges, Variable speed, D1-8 Spindle nose, 3.125" Hol...

Gardner Denver Screw type Air compressor with Kaeser KRD 100 Air dryer operating range 40- 125 PSIG

Haas HRT-210 Rotary table,

Very good condition YCM dual column Machining center with Fanuc 18i-MB control, Tool and part probes, Ready to go now

Planotec series surface grinders from Supertec Feature: Ballscrew & Servo motor on downfeed Double "V" ways on saddle and table Heat exchanger on hydraulic system Auto lube system Conversational to...

Cycle Interrupt Button on Control, Conversational Touch Screen Control, Harden Guide ways on Wheel head, Automatic Lube System, precision Cartridge Spindle, AC Servo Motor/Ball screw on Down feed, ...

Hardinge/Emag 2 Axis CNC inverted lathe with simple load and unload, very reliable, amazingly simple and Fast, Fanuc 21i-T control and drives, 14 station parts conveyor, Chip conveyor, Mist collect...

Very nice lathe for machine shop. Tool room or hobbyist. well equipped. and clean

Nice Engine lathe, inch/metric threading, inch dials, Gap bed, Trav-A Dial on "Z" axis, 18 speeds, foot brake

Hurco BMC 2416/SSM Vertical Machining Center, Ultimax SSM Control, 30" X 16" table size, Drilled and tapped Sub plate 18" x 28", 20 Assorted tool holders, All parameters backed up on disc, hour met...

Nice optical comparator with Glass scales and Q 16 computer for Circles, angles, Skew, Hole to hole locations etc.

Good transformer Up or Down, 220, 380, 440 volt

Excellent condition Double column, CNC machining center with Fanuc 21i-MB control, 40 station ATC, #50 cat, 2 speed Geared head, Box way Machine