Filters

Haas HRT-210 Rotary table,

Very good condition YCM dual column Machining center with Fanuc 18i-MB control, Tool and part probes, Ready to go now

Hardinge/Emag 2 Axis CNC inverted lathe with simple load and unload, very reliable, amazingly simple and Fast, Fanuc 21i-T control and drives, 14 station parts conveyor, Chip conveyor, Mist collect...

Nice condition from toolroom, well maintained with toolholders.

Nice Engine lathe, inch/metric threading, inch dials, Gap bed, Trav-A Dial on "Z" axis, 18 speeds, foot brake

Hurco BMC 2416/SSM Vertical Machining Center, Ultimax SSM Control, 30" X 16" table size, Drilled and tapped Sub plate 18" x 28", 20 Assorted tool holders, All parameters backed up on disc, hour met...

Nice optical comparator with Glass scales and Q 16 computer for Circles, angles, Skew, Hole to hole locations etc.

Good transformer Up or Down, 220, 380, 440 volt

Excellent condition Double column, CNC machining center with Fanuc 21i-MB control, 40 station ATC, #50 cat, 2 speed Geared head, Box way Machine

Heavy Duty VMC, Bridge center or Double Column machining center, 120" X 94" x 42" travels

Heavy duty, Box way, geared head, 35 HP Vertcal Machining center model VMC-4100 AG, with Mitsubishi M625 control, Geared head, #50 taper, 32 ATC, and Coolant through the spindle

Famous Marvel, Armstrong Blum Quality, Vertical infeed bandsaw model No.#8 mark II, 1" blade, 45 degree angle left or right.

Very Nice well tooled DV-59, Used only oil for coolant, great shape, Available for an additional charge Cross slide = $ 1,000.00, Air operated collet closer = $ 300.00

Very good condition Gorton model 375-4 tool and Cutter grinder with attachments

Heavy duty Dake Movable head 75 ton "H" frame press with Adjustable table with hand crank to raise and lower, Dake"s Special Cylinder design for greater rigidity and straight Broaching.

Very good condition lathe with Sony read outs, 3- jaw Chuck, Aloris dovetail quick change tool post, Steady rest and coolant system.

Clausing /Colchester 17" x 80" straight bed, with good ways and gears, 16 Geared head gives great number of feeds and threads standard, 12" 3-jaw, 5" steady rest, Aloris tool post with 2 holders

Nice 16" Capacity built like an Amada, Heavy duty 7' infeed roller table with vertical rollers, 24" discharge table, Chip conveyor, rapid advance to Flag

Landis Tool Co. Litton Industries, Cylindrical Grinder With Dynamic Wheel balancing, and All documentation

Very good condition Kearney & Trecker Plain Horizontal mill, #50 taper, 12" x 62" table, with two Arbor supports

Chip Wringer System, complete with Electric chain hoist 1,000 lb. capacity, Electrics and separate stainless steel oil collection tank with Float controlled pump

Toyoda Very clean CNC angle head grinder,

Very well maintained Universal Grinder from Jones & Shipman, model 1310, 8" x18" Capacity

New old stock, unused in crate, dry type step down or step up, Delta, Wye