| X | 30" |
| Y | 18.1" |
| Z | 17.7" |
| Power | 7.5 hp |
| RPM | 507,000 RPM |
| # ATC | 20 |
| Taper | Cat 40 |
| Table-W | 20" |
| Table-L | 39.4" |
| # Axis | 3 |
| Control | CNC (OSP 700M) |
| Dimensions | 87" x 94" X 104"high |
| Weight | 12,125 lbs. |
Table Size 39.4" X 20"
Table Load 1,102 Lbs.
X Axis Travel 30"
Y Axis Travel 18.10"
Z Axis Travel 17.70"
Spindle Nose to Table 6.3" to 24"
Spindle Taper NT40
Spindle Speed 50 to 10,000 rpm
Rapid on (X, Y, Z) 1,181" IPM
Rapid on (Z) 945" IPM
Cutting Feedrates 394 IPM
Tool Changer Type Swing Arm
Tool Change Time 1.5 Sec.
Tool Changer Capacity 20
Tool Shank CAT #40
Pull Stud MAS II Special (CAT Special)
Max Tool Diameter with adjacent tool 3.54"
Max Tool Diameter without adjacent tool 4.92"
Max. Tool Weight 17.6 Lbs.
Spindle Motor 7.5 Hp
Drive Motors (X, Y, Z) 4 Hp
Power Required 220 VAC / 3ph. / 60 Hertz
Floor Space ( L x W x H ) 87" x 94" X 104"
Machine Weight 12,125 lbs.
Machine can be lowered for shipping and moving by removing "Z" axis motor, Door and top guarding
