2024 PINNACLE AX450 HEIDENHAIN

Table Size 17.7"
Travel Ranges ( X/Y/Z ) 30"x 24" x 22"
T Slot Size ( size & deg ) 14 x 45 min
Max. Table Load (0 deg/90deg g) 660/550 lbs.
Max. Workpiece Size (W x H) 23" x 11"
Diameter of Table Hole 6.73
Spindle Nose to Table Surface 2 - 22"
A Axis, Tilt (deg) / (0.001 deg.) 220 deg (+/- 110 deg.)
C Axis Rotary (deg) / (0.001 deg.) 360 deg.
Tool Shank & Pull Stud ISO40
Spindle Inner Diameter 2.75591
Spindle Speed (rpm) Direct Drive 10000 ( 12000 )
Spindle Speed (rpm) Built In 15000
Main Motor (con./30min hp 12 / 18
Rapid Feed Rate (X/Y/Z - IPM 1181" / 1181"
Feed Rate ( X/Y/Z - IPM 945 IPM
Feed Rate ( A / C rev / min) 393 IPM
X Axis Rated Torque - In/lb 88.51
Y Axis Rated Torque - In/lb 88.51
Z Axis Rated torque - In/lb 88.51
A Axis Rated Torque - In/lb 88.51
C Axis Rated Torque - In/lb 88.51
ATC Type 24, 30 ( Chain - 40 )
Cam Type Arm
Tool Selection ( Bi-Direction ) Random
Tool Storage Capacity ( Pcs ) 24 ( 30, 40 )
Max. Tool Diameter 3.54331 ( 2.99213 )
Max Tool Length 11.8"
Max Tool Weight 17.63 lbs
Air Requirement PSI 84.34 PSI
Hydraulic Requirements 40, 30 L
Voltage 220 volt/3 phase/60 cycle
Power Requirement ( KVA ) 40
Coolant Tank Capacity ( Gal ) 79.25 Gallon
Machine Weight 15432.36 lbs.
Machine Height 114"
Floor Space ( L x W ) 122" x 88"
Packing Size ( L x W x H ) 122" x 88" x 100"
Cat40 12000 RPM Direct-Drive 8600.00
Cat40 15000 RPM Direct-Drive $18000.00
( No SubTank ) For Direct Drive $10,800.00
Coolant Tank For Direct Drive $13900.00
Coolant Thru Tool Holder $500.00
Two Screw Type Chip Conveyor at Left & Right $3000.00
Arm Type 30-Tool ATC ( Cat40 ) $1600.00
Chain Type 40-Tool ATC $7,800.00
Oil Skimmer $800.00
Data server 2 GB & Ethernet $4,000.00
Linear Scales For X/Y/Z Axis $12,800.00
Chain type 60 tool ATC $13,000.00
HSK 63 Spindle nose $2,000.00
Touch probe + Receiver + Calibration Ball $14,000.00
Heidenhain Scales X/Y/Z for AX 450 $12,800.00