Sold

1999 TSUNE TK5C 101GL

Circular or Mitre Cold Saws
Manufacturer:
TSUNE
Model:
TK5C 101GL
Condition:
Good
Year:
1999
Stock #:
3970
Serial #:
1554
Tsune CNC Carbide High Speed Saw Tsune, Carbide, Ferrous, High Speed, CNC, Fully automatic, Chop saw, Production saw Includes Reconditioning by MTC = Disassemble, Clean and inspect every Belt, Hose wire, Seal, bearing and switch as well as Hydraulic cylinders and sheet metal, Rebuild or replace as necessary for years of service, Paint, reassemble, test and recalibrate, then test again. Delivery = 4-6 weeks ARO Warranty = 90 days Terms = 25% down balance upon completion and inspection or video

Full CNC Control, Carbide saw blade, load meter, Chip conveyor, 20' Magazine bar loader, Vertical clamping, Chip brush, Material end separation chute and Mist buster mist collector., Flood coolant and Mist collector

Blade Dia14"355.6 mm
Power15 hp11.2 kW
ControlCNC (Tsune)CNC (Tsune)
Dimensions305" x 84" x 76" High305" x 84" x 76" High

Capacity .6" to 4.33" Steel
Carbide cap. Solid steel .98" to 3"
Capacity cutting round tube 5.12"
Square tube .6" to 4.33"
Carbide saw diameter 360mm/ 14"
HSS saw diameter 420mm/16.5"
Saw head feed type Hydraulic
Material feed one stroke 24"
Shortest cut off (Part length) .4"
Remnant length 3.3"
Blade speeds 12-120 RPM
Loading magazine Incline type
Max bar length 20'
Main Saw motor 15 HP
Coolant tank capacity 38 Gallons
Operating Dimensions 305" x 84" x 76" High
Weight 7,850 Lbs.

This equipment has been sold. Similar equipment available now is shown below.

We use cookies to improve your experience. Privacy Policy.

Accept
Decline All