1995 BRIDGEPORT EZ-TRAK SX SERIES I

Table Travel ( x axis ) 30"
Saddle Travel ( y axis ) 12"
Quill Travel 5"
Knee Travel ( z axis ) 16"
Ram Travel 12"
Throat Distance ( min. ) 6-3/4"
Throat Distance ( max. ) 18-3/4"
Table to Spindel Nose Gage Line ( min. ) 2-1/2"
Table to Spindel Nose Gage Line ( max. ) 18-1/4"
Working Surface 48" x 9"
Height Above the Floor ( max. ) 47-.4"
Max. Uniform Load 300 lbs
Ball Screws ( Diameter / Pitch ) 1-1/4" / 0.200"
T-Slots 3 @ 2.5" Spacing
T-Slots Size 5/8"
Spindle Motor (Continuosu / 30 min duty ) 2 hp / 3 hp
Spindle Speed ( HI ) 500 - 4200
Spindle Speed ( LOW ) 60 - 500
Quill Diameter 3-3/8"
Spindle Taper R-8
Control Model EZ-Trak DX
Positioning Rapid - Auto ( X, Y ) 100 ipm
Positioning Rapid - Manual ( X, Y ) 100 ipm
Feedrate Range ( X, Y ) 0.1 - 100 ipm
Minimum Increment 0.0001"
Positioning Accuracy +/- 0.001" over saddle
Positioning Repeatability +/- .0008" over saddle
Input Resolution 0.0001"
Servo Resolution 0.0001"
Display Resolution 0.0001"
Disk storage ( standard ) 3.5 " diskette. HD 1.44Mbytes
Hard drive ( standard ) 528 Mbytes
Part program loading RS-232 bi-directional
Input/output 1 RS-232 Serial port
Maintenace Diagnostic routines
Input power 208/230/460 volts
Power Capacity 4 kva