2015 PINNACLE BX-500

Table Size 57.08" x 24.01"
Travel Range (X) 51.18"
Travel Range ( Y) 24.01"
Travel Range (Z) 24.01"
Max Table Load 1,874 Lbs.
Spindle Nose to Table Surface 4.33" - 28.34"
T-Slot .7" x 4.92" x .19"
Spindle Taper BT 40
Bearing Inner Diameter 2.75"
Spindle Center to Column 26.57"
Spindle Speed 15,000 RPM
Draw Bar Force 900+ 100
Main Motor ( con/ 30 min) 20HP/ 24 HP
Motor Type Indramat 1 MB 160F-4B
Motor Torque ( Con/ Max Nm) 48/120
Driver Type Worm Gear
Reduction ratio 1 : 72
Tilting Range 120 degrees
Max. Speed (rpm) 25 RPM
Clamp Torque 1157
Working Torque ( Nm ) 764
Type Embedded
Drive Type Direct Drive
Table Diameter 19.68"
Center Bore Diameter 1.96"
Rotation Speed 50 RPM
Min. Index 0.001
Max. Table Load 1,102 Lbs.
Rapid Feed Rate ( X/Y/Z ft/min) 1416/1416/936 IPM
Feed Rate ( X/Y/Z Inches/min) 394 IPM
Rated Torque (X/Y/Z ft/Nm) 36'/36'/36'
B-Axis Rated Torque 36'
C-Axis Rated Torque 1033'
ATC Type Plate
CAM Type Dual Arm
Tool Selection (Bi-direction) Random
Tool Storage Capacity 24 (32/40)
Max Tool Diameter 3.5" (2.9")
Max Tool Length 9.8"
Max Tool Weight 8
Positioning XYZ Linear Axis .00019"
BC Rotary (sec) 15"/10"
Repeatability XYZ Linear Axis .00011"
BC Rotary (sec) 10"/8"
Air Requirement (kg/cm) 6
Voltage 220/440 volt, 3 phase
Power Requirement(KVA) 40
Coolant Tank Capacity 80 Gallons
Machine Weight 15,873 Lbs.
Machine Height 122"
Floor Space 133" x 87"
Packing Size 135" x 90" x 100"
TOUCH PROBE + RECEIVER + CALIBRATION BALL $12,880.00 Installed & Include
CTS + 20 BAR PUMP & TANK 71.6 Instead of 48 Nm $27,968.00
CTS + 20 BAR PUMP & Tank $9,936.00
CHAIN TYPE 40 - TOOL ATC $7,176.00
CHAIN TYPE 60 - TOOL ATC $19,320.00
HEIDENHAIN LINEAR SCALES FOR XYZ AXIS $13,432.00 Installed & include
OIL SKIMMER $496.80
Warranty Mechanical 2 Years
Terms: 30% Down to Place Order - 50% by Irrevocable LC at Site Before Shipment