New PNNACLE LV-105 | Vertical Machining Centers

Table Size 48" X20"
Table Load 1320 lbs.
X Axis Travel 40"
Y Axis Travel 22"
Z Axis Travel 22"
Spindle Nose to Table 3.9" to 26"
Spindle Taper 40 taper
Spindle Speed 10,000 RPM
Rapid on (X, Y, Z) 1417 IPM
Cutting Feedrates 393 IPM
Tool Changer Type Swing Arm
Tool Changer Capacity 24 Tools
Tool Shank Cat #40
Max Tool Diameter 4.52"
Max. Tool Weight 33 lbs.
Spindle Motor 16/20 HP
Drive Motors (X, Y, Z) 4 HP
Chip Conveyor Type screw 2 total
Coolant Tank capacity 300L, 80 Gallons
Power Required 20 KVA
Air Required 6 Kg/cm2
Floor Space ( L x W x H ) 111" X 86" X 116"
Machine Weight 12,540 lbs.
draw bar force 2000 kgf/ 4,400 lbs.
Spindle chiller INCLUDED
CHAIN TYPE 40-TOOL ATC $3,496.00
QAN200L, 7.5/11.5kW (S1/S6-40%) $3,680.00
10000RPM SPINDLE $2,760.00
+ QAN200L12000RPM SPINDLE MOTOR $11,960
+ QAN200U 15000RPM SPINDLE MOTOR $16,560.00
HSK-A63 in lieu of CAT40 $2,000.00
+ 20 Bar (no sub tank), For Belt (or Gea $6,256.00
+ 30 Bar (no sub tank), For Belt (or Gear) Type $7360.00
+ 70 Bar (no sub tank), For Belt (or Gear) Type $14,720.00
+ 20 Bar + Extra 300L Coolant Tank, For Belt (or Gear) Type $9,936.00
+ 30 Bar + Extra 300L Coolant Tank, For Belt (or Gear) Type $11,040.00
+ 40 Bar + Extra 300L Coolant Tank, For Belt (or Gear) Type $15,456
+ 50 Bar + Extra 300L Coolant Tank, For Belt (or Gear) Type $16,960.00
+ 70 Bar + Extra 300L Coolant Tank, For Belt (or Gear) Type $18,400.00
Programmable coolant Nozzle $496.00
OIL SKIMMER $736.00