New 2019 PINNACLE BX-900A | Vertical Machining Centers (5-Axis)
Have one to sell?
ConditionNew
New
Pinnacle BX-900A Fanuc 4+1 Axis Vertical Machining Center w/ built in Rotary Table
BX900A is high speed, high accuracy with
5-axis simultaneously controlled machining center. Equips 15000rpm built-in spindle, B-axis swivel head ±120°, and C-axis Ø630mm rotary table (Built-in DD C-axis) to optimize machining space and allows complex workpieces to be finished in just one setup and reduces cycle time.
FANUC 0i-MF+ 10.4" COLORFUL TFT, FOR MOLD AND DIE
Oiled Cooled Ball-Screws
Hiedenhain feedback scales($16,400) and Probe($14,000) (suggested)
* Air blast through spindle
* Circular coolant Nozzle
* coolant flushing system
* 3 axes protection covers
* Full splash guard
* Automatic lubrication system
* Working lamp
* Operation status light
* Arm type 30-tool ATC
* Z axis pneumatic balance system
* Cooling system
* Air gun and water spray-gun
* MPG handwheel
* Heat exchanger
* RS-232 Interface
* Rigid tapping
* Spindle oil cooler
* Adjusting tools and box
* Leveling bolts and pads
* Operation and programming manual
* Encoder for B-axis & C-axis
Table Size 66.9" x 33.4"
Travel Range (X) 59"
Travel Range ( Y) 35.4"
Travel Range (Z) 45.2"
Max Table Load 4,400 Lbs.
Spindle Nose to Table Surface 8.07" - 53.34"
T-Slot .7" x 5.92" x .19"
Spindle Taper DIN69871A
Bearing Inner Diameter 2.75"
Spindle Center to Column 29.92"
Spindle Speed 15,000 RPM
Draw Bar Force 900+ 100
Main Motor ( con/ 30 min) 20HP/ 26 HP
Motor Type Indramat
Motor Torque ( Con/ Max) 48/ 120
Driver Type Worm Gear
Reduction ratio 1 : 120
Tilting Range 120 degrees
Max. Speed (rpm) 16.6 RPM
Clamp Torque(Nm) 1765
Working Torque (Nm) 765
Type Separated (Worm Gear Type)
Table Diameter 24.8"
Center Bore Diameter 2.95"
Rotation Speed 11.1 RPM
Min. Index 0.001
Max. Table Load 1,763 Lbs
Rapid Feed Rate ( X/Y/Z ft/min) 52.5'/ 52.5' / 39.4'
Feed Rate ( X/Y/Z ft/min) 2,624'
Rated Torque (X/Y/Z ft/Nm) 36'/36'/36'
B-Axis Rated Torque (Nm) 11
C-Axis Rated Torque (Nm) 11
ATC Type Plate
CAM Type Arm
Tool Selection (Bi-direction) Random
Tool Storage Capacity 30 (40/60)
Max Tool Diameter 3.5" (2.9")
Max Tool Length 9.8"
Max Tool Weight 17.63 Lbs
Positioning XYZ Linear Axis .000393"
BC Linear Axis .59"/ .39"
Repeatability XYZ Linear Axis .000196"
BC Linear Axis .39" / .196"
Air Requirement (kg/cm) 6
Voltage 380 V
Power Requirement(KVA) 40
Coolant Tank Capacity 185 Gallons
Machine Weight 30,864 Lbs.
Machine Height 126"
Floor Space 155.5" x 125"
We use cookies to improve your experience. Privacy Policy.